This bench-mounting mechanical load frame is ruggedly constructed to encompass the strain and loads involved with the test. A limit switch is provided for the bottom limit of travel. A handle is provided for manual operation during calibration. The machine is supplied complete with load ring 30 kN cap. incorporating stem brake feature to hold the maximum reading. For testing 4” (101.6 mm) dia. specimens the 50 kN load ring/ load cell should be used instead of the 30 kN fitted on the machine. The machine comes with Marshall Stability Test Controller.
Technical Specifications
* Standard : BS 598-107, ASTM D1559, AASHTO T245, NF P98-251, DIN 1996
* Platen Speed : 50.8 mm / min
* Vertical Clearance : 375 mm (platen down crosshead up)
* Horizontal Clearance : 270 mm
* Platen Diameter : 140 mm
* Platen Piston Travel : 50 mm
* Dimension (mm) : 540 (L) x 390 (W) x 710 (H)
* Approx. Weight : 105 kg
* Power : 240 V, 50 / 60 Hz, 1 ph, 0.5 Hp, 7.2 A, 1100 W
Unit Consists Of :~
* NL 2010 X / 002 – P 001 50 kN ‘S’ Type Load Cell ( 1 no )
* NL 2010 X / 002 – P 002 Displacement Transducer ( 1 no )
* NL 2010 X / 002 – P 003 Control Panel ( 1 no )
* NL 2010 X / 002 – P 005 Stability Mould ( 1 no )
Optional Accessories :~
* NL 2010 X / 003 – A 001 Ø 100 mm Stability Mould
* NL 2010 X / 003 – A 002 Printer