NL Scientific – Jitrasindo

NL 1018 X / 001 Large Capacity Screen Shaker

jitrasindo — Tue, 20 Aug 2013 06:50:23 +0000

High capacity screening for large sample. Ideal for determination of crushed stone, sand and gravel. Sample are quickly processed into as many as seven separation in a litres as tree to five minutes.

Typical batch sizes up to one cubic foot (0.028 m³) or more vary with material type .Mechanical clamping are easily secured in place by a few quick strokes. (The unit come with supporting backup clutch for tray and hooked for tensioning finer sizes screening).

Technical Specifications :
* Standard : ASTM C-136
* Tray Capacity : 7 Trays
* Screen Tray Dimension (mm) : 870 (L) x 570 (W) x 1120 (H)
* Power : 240 V, 50 / 60 Hz, 1 ph, 750 W
* Approx. Weight : 100 kg

NL 1012 X / 003 Digital Point Load Tester Apparatus

jitrasindo — Tue, 20 Aug 2013 06:34:32 +0000

Used to determine the strength values of a rock specimen both in the field and in the laboratory. It consists of a load frame for applying loads up to 50 KN, on which a manual hydraulic jack is mounted.

The instrument accepts core specimens up to 4” (101.6 mm) diameter which are loaded by two cone-shaped points. The apparatus applied load measured by a pressure transduce with a handle digital display controller unit.

Technical Specification :
* Standard : ASTM D5731
* Max. Capacity : 50 kN x 0.1 kN
* Dimension (mm) : 240 (L) x 330 (W) x 710 (H)
* Approx. Weight : 25 kg

Set Consists Of :~
* NL 1012 X / 003 – P 001 50kN ‘S’ Type Load Cell with Handheld Digital Display Controller Unit (1 no)
* NL 1012 X / 003 – P 002 Harden Conical Cone Set (1 set)
* NL 1012 X / 003 – P 003 Wooden Carrying Case (1 no)
* NL 1012 X / 003 – P 100 Digital Hand Held Load Controller (1 no)

Optional Accessories : –
* NL 1012 X / 003 – P 002 Harden Conical Cone Set
* NL 1012 X / 003 – A 001 Safety Protection Case

NL 1012 X / 002 Point Load Tester Apparatus

jitrasindo — Tue, 20 Aug 2013 05:57:03 +0000

Used to determine the strength values of a rock in the field and laboratory. It consists a load frame for applying loads up to 50 kN with a manual hydraulic jack in mounted. This instrument accepts core specimen up to 4’’ (101.6mm) diameter which are loaded by two cone-shaped point. Come with units 6’’ diameter pressure indication gauge for high and low range reading.

Technical Specification
* Standard : ASTM D5731
* Dimension (mm) : 690 (L) x 326 (W) x 515 (H)
* High Range Gauge : 0 – 50 kN x 1.0 kN
* Low Range Gauge : 0 – 5 kN x 0.01 kN
* Approx. Weight : 33 kg

Optional Accessories : –
* NL 1012 X / 002 – P 001 Harden Conical Cone Set

NL 1010 Test Sieve

jitrasindo — Tue, 20 Aug 2013 05:54:38 +0000

Our range of sieves and screens have bodies manufactured from stainless steel are available in 200, 300 and 450 mm diameter versions which can be supplied either with woven wire cloth or perforated plate (square or round holes). A clear rigid design of minimum weight and free from corners where the material could be lodged.

Stainless steel and brass quality sieve cloth is used for highest performance.An essential feature of test sieve is that the mesh should be flat and uniform and with permanent tension round the whole circumference. The same is fully observed in stainless steel test sieve.

NL 1009 X / 001 Laboratory Jaws Crusher

jitrasindo — Tue, 20 Aug 2013 05:51:30 +0000

Jaw crusher are mainly used to break such kind of rocks and ores with medium hardness, they are important equipments in metallurgy, geology and building material and chemical industry for experiment and laboratory use.

Technical Specifications :
* Standard : UNE 83 120
* Dimension (mm) : 355 (L) x 330 (W) x 380 (H)
* Rotation Speed : 1400 r.p.m.
* Max Feed : 45 mm
* Material Outlet Dimension : 6 to 10 mm
* Material Inlet Dimension : 100 x 60 mm
* Production Rate : 230-400 kg / hr
* Approx. Weight : 137 kg
* Power : 200 V, 50 / 60 Hz, 2 Hp, 1 ph, 1500 W, 8.66 A

Unit Consists Of :~
* NL 1009 X / 001 – P 002 Specimen Tray

Spare Part :~
* NL 1009 X / 001 – P 001 Jaw Blade (Set of 2)

Optional Accessories :
* NL 1009 X / 001 – A 001 Sound Prove Case with Bench

NL 1008 X / 001 Loss Angeles Resistance Abrasion Apparatus

jitrasindo — Tue, 20 Aug 2013 05:49:50 +0000

This apparatus used to determine the resistance of aggregates to abrasion. The drum is rotated by a speed reducer driven by an electric motor, equipped with an automatic counter. Abrasive charge order separately.

Specification :
* Standard : ASTM C131, NF P18-573, EN 1097-2, UNE 83-114
* Drum Speed : 31 – 33 r.p.m.
* Dimension (mm) : 1160 (L) x 800 (W) x 950 (H)
* Approx. Weight : 235 kg
* Power : 220 V, 50 / 60 Hz, 750 W

Unit Consists Of :~
* NL 1008 X / 001 – P 001 Control Panel (1 no)
* NL 1008 X / 001 – P 002 Receiving Tray (1 no)

Optional Accessories :~
* NL 1008 X / 001 – A 001 Safety and Sound Prove Cabinet
* NL 1008 X / 001 – A 002 ASTM, AASHTO, UNI, CNR Abrasive Charges (Set of 12 nos.)
* NL 1008 X / 001 – A 003 EN Standard Abrasive Charges (Set of 12 nos.)

NL 1007 X / 001 Sand Absorption Apparatus

jitrasindo — Tue, 20 Aug 2013 05:47:42 +0000

Used for the determination of the particle density of fine aggregates
* Standard :BS 812-137, AASHTO T84, ASTM C128, EN 1097-6

Set Consist Of :
* NL 1007 X / 001 – P 001 Cone (1 no)
* NL 1007 X / 001 – P 002 Tamper (1 no)
* NL 1007 X / 001 – P 003 Pyknometer (1 no)

NL 1008 X / 001 Loss Angeles Resistance Abrasion Apparatus

jitrasindo — Tue, 20 Aug 2013 04:53:37 +0000

Unit Consists Of :~
* NL 1008 X / 001 – P 001 Control Panel (1 no)
* NL 1008 X / 001 – P 002 Receiving Tray (1 no)

NL 1007 X / 001 Sand Absorption Apparatus

jitrasindo — Tue, 20 Aug 2013 04:51:10 +0000

Used for the determination of the particle density of fine aggregates
* Standard :BS 812-137, AASHTO T84, ASTM C128, EN 1097-6

Set Consist Of :
* NL 1007 X / 001 – P 001 Cone (1 no)
* NL 1007 X / 001 – P 002 Tamper (1 no)
* NL 1007 X / 001 – P 003 Pyknometer (1 no)

NL 1006 X / 001 Laboratory Coring Machine

jitrasindo — Tue, 20 Aug 2013 04:46:55 +0000

This portable coring machine used in laboratory to obtain cores from irregular rock samples.

Techincal Specification :
* Tank Dimension ( mm ): 800 (L) x 700 (W) x 540 (H)
* Maximum Coring : 130 mm Diameter
* Stroke Length : 400 mm
* Speed : 750 r.p.m.
* Approx. Weight : 70 kg
* Power : 240 V, 1 ph, 50 / 60 Hz 1000 W

Unit Consists Of :~
* NL 1006 X / 001 – P 001 Water Tank with Drain Valve c/w Clamping Device (1 set)
* NL 4006 X / 002 Coring Machine (1 no)

Optional Accessories :
* NL 7018 X / 001 Core Bit Dia. 35 mm / 11/2”
* NL 7018 X / 002 Core Bit Dia. 50 mm / 2”
* NL 7018 X / 003 Core Bit Dia. 75 mm / 3”
* NL 7018 X / 004 Core Bit Dia. 100 mm / 4”
* NL 7018 X / 005 Core Bit Dia. 150 mm / 6”
* NL 7018 X / 006 Core Bit Dia. 200 mm / 8”