Core Drilling Rig – Jitrasindo http://www.jitrasindo.com PT. Jelita Citra Solusindo Wed, 25 Apr 2012 16:17:11 +0000 id hourly 1 https://wordpress.org/?v=6.5.5 Core Drilling Rig http://www.jitrasindo.com/jinan-material-testing/core-drilling-rig/ http://www.jitrasindo.com/jinan-material-testing/core-drilling-rig/#respond Tue, 24 Apr 2012 20:31:03 +0000 http://www.jitrasindo.com/?p=77 Continue Reading]]> Applications

The Core Drilling Rig is a light type machine at high speed with hydraulic feeding.

  1. Drillings for the general exploration and investigation of solid mineral deposit, engineering geotectonic survey and concrete structure inspection holes.
  2. Diamond drill bit, alloy drill bit and steel roller drill bit and so on are available for drilling according to different geological structures.
  3. When the final holes are respectively 75mm and 46mm in diameter, the rated hole depths are separately 100m and 180m. The maximum of depth may not exceed 110% of that drilled in each hole. The maximum allowable hole diameter is 150 mm.

Features

  1. With hydraulic feeding device, elevated drilling efficiency, reduced labor strength.
  2. The rig is equipped with an upper spherical jaw holding mechanism and hexagonal drive drilling rod which can be replaced without shutdown, high efficiency, safe and reliable.
  3. A hole bottom pressure gauge is mounted indicating the pressure in order to control the status inside the hole.
  4. Compact structure, small volume, lightweight, high detachability, easy transportation and suitable for the operations in plains or mountain areas.

Technical Specifications

  • Drill
    Drilling depth 100/180m
    Initial hole dia. 150mm
    Final hole dia. 75 / 46mm
    Drill rod dia. 42 / 43mm
    Angle range 90°-75°
    Dimensions(L×W×H) 1433×697×1274(mm)
    Weight(without power unit) 420kg
  • Swivel Head
    Spindle speed(5-speed) 1010/790/470/295/140 r/min
    Spindle stroke 450mm
    Upward displacement speed of idling vertical spindle 0.05m/s
    Downward displacement speed of idling vertical spindle 0.067m/s
    Spindle pull-down max 15KN
    Spindle lifting capacity max 25KN
  • Hoist
    Max .lifting capacity(single rope) 11KN
    Lifting rotating speed 121/ 76/ 36 r/min
    Hoisting drum linear velocity (two levels) 1.05，0.66，0.31m/s
    Drum dia. 140mm
    Wire rope dia. 9.3mm
    Wire rope capability 35m
    Brake dia. 252mm
    Brake belt width 50mm
  • Oil Pump
    Model YBC-12/80
    Rated pressure 8Mpa
    Displacement 8ml/r
    Rated speed 1500r/min
  • Power (diesel engine or motor)
    Model (diesel engine) ES1100
    Rated power 12.1KW
    Rated speed 2200r/min
    Model (motor) Y160M-4
    Rated power 11KW
    Rated speed 1460r/min
]]> http://www.jitrasindo.com/jinan-material-testing/core-drilling-rig/feed/ 0