RYME (Automotive and Vehicle Inspection Equipment) – Jitrasindo

Dynamometric bench with ASM System and Opacity in charge

jitrasindo — Fri, 21 Sep 2018 11:12:26 +0000

Banks emissions ASM is a very useful tool in workshops, technical centers auto mechanics and inspection center of the car, as they are designed to detect, prevent and investigate possible problems of ignition and injection as well as improving consumer fuel and measuring gas emissions vehicle under load.

Product Ranges :

MODEL: ASM 2WD Dynamometer ASM Dynamometer ASM

The bank emission ASM for vehicle 2WD is a very useful tool in workshops, technology centers auto mechanics and inspection center of the car, as it is designed to prevent, locate and investigate possible ignition problems and injection and to improve fuel consumption and measurement of gas emissions of the vehicle under load. More information

MODEL: ASM 4WD Dynamometer ASM Dynamometer ASM

The emission bank ASM for Vehicle 4WD is a useful tool in workshops, technology centers auto mechanics and inspection center of the car. It is designed to prevent, locate and investigate possible ignition problems and injection as well as for improving fuel consumption and emissions measurement gas load vehicle. More information

MODEL: BD U 2WD Dynamometer Bench Dynamometer Bench

The trainer with opacity charge for heavy vehicles is a very useful tool in workshops, technical centers auto mechanics and inspection center of the car, as it is designed to prevent, locate and investigate potential problems on and injection as well as for improving fuel consumption and emissions measurement gas load vehicle. More information

Soundmeter

jitrasindo — Fri, 21 Sep 2018 11:07:11 +0000

The sound level meter is a measuring instrument used to measure sound pressure levels (of which depends on the amplitude and, therefore, the acoustic intensity and perception, loudness). Specifically, the meter measures the level of noise that exists in a particular place and at a given time. The unit works with the sound level meter is the decibel.

Product Ranges :

Model SC-101 → Integrating Soundmeter

The SC101 is a noise measuring instrument and it not only takes the measurements, but also makes the checks and calculations in the rules for obtain, in situ, the final result.
It is the first integrating sound level meter with measurement protocols thus simplifies the process for obtaining results. Guide the user step by step in the realization of measurements.
The SC101 has a large screen, which displays all useful for the measurement information. The data displayed varies always adapting to the application chosen, such that only the parameters are displayed necessary in every application.

Technical Data : Protective Case. Windproof protective screen. Dimensions 336 x 82 x 20 mm. Weight With batteries: 487 g. Without batteries: 438 g.

Model SC-102 → Integrating Soundmeter

The SC102 is a noise measuring instrument as it not only makes the measurements but also checks and calculations specified in the rules, for, in situ, the result end.
It is the first integrating sound level meter with measurement protocols therefore simplifies the process for the results. It guides the user step by step in the realization of measurements.
This model features a removable sound meter preamplifier to perform noise measurements both vehicles machine (pressure and sound power).

Technical Data : Protective Case. Windproof protective screen. Dimensions 291 x 82 x 20 mm. Weight With batteries: 463 g. Without batteries: 413 g.

Decelerometers

jitrasindo — Fri, 21 Sep 2018 10:55:18 +0000

The decelerometer allows rapid testing and the vehicle brake systems. Measure the brake deceleration and its dependence on the control force applied to the brake pedal.

Model 8531 → Decelerometer 8531

This decelerometer allows a fast test of the braking systems of vehicles. It measures the brake deceleration and its dependence on the control force applied on the brake pedal. Portable equipped with printer, LCD display and software for PC. Force sensor connection or pressure sensor.

Model BrakeCheck → Decelerometer BrakeCheck

Portable and fully independent unit, battery working, that can be used in workshops, government traffic authorities, test and inspection points, etc. to check and report on the performance of the vehicle brakes.
The BRAKECHECK determines the performance of the braking both for the service brake ( foot brake ) and the hand brake, measuring the deceleration.

Technical Data

Measurement of the maximum Deceletation of Front / Rear point
Measurement of the average Deceleration of Front / Rear point
Measurement of the Acceleration of left / right point
Indication and value of the vehicle pulling left / right
Calculation of stopping distance (meters)
Calculation of the test speed ( km/h)
It can be used for a hand-brake test
Acustic signal
Simple indicator system by LED
“Calibration required” indicator
Internal auto diagnostic
The test results are indicated in ‘G’ units, with maximum of +/- of 0,02 G error.

Speedometers

jitrasindo — Fri, 21 Sep 2018 10:37:12 +0000

Ideal machine to test and to determine the status of the speed limiter of the moped. Steel Frame of high resistance assembled under the exclusive “Perfect-fit” system, which characterizes to all the frames of the RYME brand giving great assembling design accuracy, avoiding in human error possibilities and with an excellent look. The speed measure is obtained trough an incremental encoder installed on the front roller axle. Due to the precise measure of the encoder obtains a high accuracy of reading, Superior to +/-0,1 km/h.

Product Ranges :

MODEL: VTC II → Speedometer Mopeds

deal machine to test and to determine the status of the speed limiter. Steel Frame of high resistance assembled under the exclusive “Perfect-fit” system, which characterizes to all the frames of the RYME brand giving great assembling accuracy, avoiding any human errors possibilities and getting an unsurpassable look. The rollers are equipped with a high accuracy inductive sensor for the measurement, they are designed for an intensive use under high load conditions. They are dynamically balanced and have a robust thickness.
The surface is smooth and is covered with in an antioxidant treatment that infers to the rollers a great durability. Frame to set on the floor or for portable use. More information

MODEL: VTC III → Speedometer Mopeds

MODEL: VTL N → Speedometer Light Vehicles Pneumatic

Ideal machine to do tests and determine the status of the Taximeter, Speedometer and Tachometer. We will be able to observe the kilometric and time drag, as well as determine the run. The speedometer will determine the speed indicated by the technician (when the person in charge registers the speed) and the real one, calculating the difference between both (in %). Maximum weight per axle 4 tn. Maximum width of track/mín. 800/2.300 mm. Test speed 0 – 200 km / h. More information

MODEL: VTL AE → Speedometer Light Vehicles Electric Drag

Ideal machine to do tests and determine the status of the Taximeter, Speedometer and Tachometer. We will be able to observe the kilometric and time drag, as well as determine the run. The speedometer will determine the speed indicated by the technician (when the person in charge registers the speed) and the real one, calculating the difference between both (in %). Maximum weight per axle 4 tn. Maximum width of track/mín. 800 / 2.300 mm. Test speed 0 – 300 km / h. More information

MODEL: VTU N → Speedometer Universal Pneumatic

Ideal machine to do tests and determine the state of the Taximeter, Speedometer and Tachometer. We will be able to observe the kilometric and time drag, as well as determine the run. The speedometer will determine the speed indicated by the technician (when the person in charge registers the speed) and the real one, calculating the difference between both (in %). Maximum weight per axle 16 tn. Maximum width of track/mín. 800/2.620 mm. Test speed 0 – 200 km / h. More information

MODEL: GPS → Taximeters checker by GPS

Verification of taximeters with focus on tariffs on all types of taxis including taxis equipped with the most. modern security systems.
· Measures speed, distance and time.
· Measurement device based on global satellite positioning.
The measurements are done on the road, measuring the exact movements of the vehicle in the test. This is done by calculation of time and information on position sent from the satellites, and thereby calculation of the movement in space and speed of the vehicle. More information

MODEL: VTL → CYCLE Speedometer Light Vehicles

Ideal machine for testing and determining the state of the speed limiter of ATVs, motorcycles and tricycles. Frame of high strength steel assembled under the exclusive “Perfect-fit” which characterizes all racks of brand RYME a precision fit avoiding in turn the possibility of human error in the assembly and giving great looking.
The speed measurement is obtained via an incremental encoder mounted on the axis of the front rollers. Given the encoder resolution is obtained highly accurate reading than +/- 0.1 km / h. More information

Test Lines

jitrasindo — Fri, 21 Sep 2018 10:22:44 +0000

The Net family is composed of a Side Slip Tester for cars, a suspension bench and a brake tester for cars, each of which can also be purchased separately. It comes with a powerful computer and with electronic plates for the measuring of signals and the presentation of data on the screen in a clear way for the user.

MODEL: COMBI STANDARD → Test Line Combi Net Standard

The Net family is composed of Brake Tester (Max. 4 tn), Side Slip Tester, Suspension Bench, Smokemeter, Gas Analyser, Soundmeter, Headlight Tester and Visual Inspection. More information

MODEL: COMBI SEMI → Test Line Combi Net Semi

The Net family is composed of Brake Tester (Max. 8 tn), Side Slip Tester, Suspension Bench, Smokemeter, Gas Analyser, Soundmeter, Headlight Tester and Visual Inspection. More information

MODEL: TANDEM → Tandem [Automatic adjustment of the Battle]

Técnicas Reunidas de Automoción, S.A., continuing its strong commitment to R & D, has developed tandem line inspection. This line aligner to form a first step and a tandem brake tester and bank suspensions. The duo consists of two pairs of benches for testing brakes and suspension, a fixed and a movable which automatically adjusts to the specific battle vehicle to be tested. More information

MODELO: MONOBLOC → Test Line Monobloc

The Monobloc complete lane consists of a side slip tester and a frame that integrates a brake tester and a suspension bench. The obtained data are clearly presented in a TFT LCD screen for quick interpretation of the results. More information

Suspension Bench

jitrasindo — Fri, 21 Sep 2018 10:13:51 +0000

Suspension Bench its main objective is to make a quick and efficient analysis of the suspension of the vehicle. The test is done by measuring the wheels of each axle individually, using the EUSAMA method. Designed and made with the exclusive system “perfect fit”.

Product Ranges

MODEL: BSL NET → Suspension Bench Light Vehicles

The Suspension Bench for testing vehicles allows for a fast and effective analysis of the suspension in the vehicle. The test is realized measuring the wheels of each axle individually using the method EUSAMA. More information

MODEL: BSU NET → Suspension Bench Universal

The new Suspension Bench for testing vehicles is designed to support drive over loads up to 16.000 Kg. and permits heavy vehicles to pass over without necessity of covers. More information

BRAKE TESTERS

jitrasindo — Fri, 21 Sep 2018 09:58:27 +0000

The main target of the brake tester is to make a quick and efficient analysis of the state of the braking control in the vehicle, measuring its maximum braking with accuracy in each of its axles, both the foot brake and the hand brake and emergency brake, as well as the ovality of the discs and drums of the braking system. It optionally incorporates a weight bridge to know the vehicle·s weight in order to be able to calculate the braking efficiency.

Product Ranges :

MODEL: FRM-NET → Brake Tester Motorbikes

The RYME Brake Tester is a very suitable system for checking the state of the brakes of motorbikes allowing loads up to 1000 Kg.The measurement of the braking force is obtained from an electric signal produced by an extensiometric gauge to the data acqusition system drivenby a microprocessor. The system consists of a frame with a roller coated in weld which assures a good adherence of the tyres even in adverse conditions.The frame includes safety systems which detect the presence of the motorbike during all the test, and the detection of the tyres when measuring. More Information

MODEL: FRM Portable → Brake Tester Motorbikes Portable

The Portable RYME ´s Braketester for motorcycles is a modular and detachable system adapted for inspections of the system of brakes “in situ”. The measure force measured from brakes is obtained through the electrical signs provided from a extensiometric gauge which is sent to the computer and handled by the program. The system consists of two rollers covered with synthetic material seated on a frame linked to an engine in an independent way. In this way is possible to handle the equipment by parts for its transport and installation to the place of use. In addition the frame includes safety systems for the protection of the tyre. More Information

MODEL: FRL-NET → Brake Tester Light Vehicle

The brake tester for light and medium size vehicles is designed to support loads up to 4 Tn. per axle, and its main objective is a quick and efficient verification of the state of the vehicle braking control, measuring with accuracy the maximum braking in the front and backaxles, handbrake as well as the ovality of the discs and drums of the braking system. More Information

MODEL: FRL 5.5 NET → Brake Tester Light Vehicles [ 5,5 Kw.]

The brake tester for light and medium size vehicles is designed to support loads up to 8 Tn. per axle, and its main objective is a quick and efficient verification of the state of the vehicle braking control, measuring with accuracy the maximum braking in the front and backaxles, handbrake as well as the ovality of the discs and drums of the braking system. More Information

MODEL: FRU-4 LIFT → Brake Tester Universal

This frame is called to be the successor of the consolidated FRU2. An innovative design and advanced manufacturing technologies give this frame all the features of its predecessor, as well as significant improvements. Among these improvements is the possibility of adapting the brake tester to the new demands marked by the new revision of the manual of Vehicle Inspection Centers, in reference to the Standard ISO 21069, on heavy vehicle brake tests. This brake tester can be equipped both with load simulation as well as with axle-lift. More Information

MODEL: FRQ NET → Brake Tester Light Vehicles and ATVs

The brake tester FRQ NET has been developed and designed to test all kind of light vehicles, from cars to quad/ATV, micro cars and motorbikes/scooters. The brake tester FRQ NET has been developed and designed to test all kind of light and medium size vehicles, from vans, cars to quad/ATV, micro cars, motorbikes/scooters. More Information

MODEL: FRQ CYCLE → Brake Tester Light Vehicles and ATVs

The FRQ CYCLE brake tester is a lightweight range designed to test quad vehicles, ATVs, quads, tricycles and motorcycles. Its main task for quick and effective verification of operating status of the brake control, accurately measuring the maximum braking in the front and rear axles, handbrake, and the existing ovality in disc and drum brake system . More Information

MODEL: PLATE → Plate Brake Tester

Quick and Simple Analysis of brake systems . Detection of differential braking force . Ultra flat, sturdy design . Turn allowed up. Maintenance free roller bearing. Large screen. LED brightness 12 digits Special coating for long lasting high friction Automatic Start Feature Integrated software and calibration Service Automatic self-diagnosis International Certification System software update integrated Power Saving Mode Easy to transport with lightweight vehicle Easy to install without forklifts Approved for Vehicle Inspection Services of Germany (HU),More Information

Side Slip Aligner

jitrasindo — Fri, 21 Sep 2018 09:40:46 +0000

Product Ranges :

Side Slip Aligner AL NET

The Side Slip Aligners make a quick and efficient verification of the geometry of the front and back axles of the different vehicles checked. The system consists of a platform to pass the wheels on the driver´s to register side slip measures on the different axles lup to 9 axles per vehicle, and a computer cabinet able to memorize the measurements of the checked axles, comparing them within accpeted predefined maximum margins in m/km. programmed in the computer. The 19’’ TFT screen also shows graphialy in deviation is positive (convergent) or negative (divergent). Both the funcionality and the system check are extremely easy, since it only requires the vehicles to pass over the platform in order to measure and memorize all the data on all axles .

More information

Side Slip Aligner AU NET

More information

Play Detectors

jitrasindo — Fri, 21 Sep 2018 09:31:55 +0000

The Play Detectors are suitable for testing the condition of the axles of a vehicle and their components. This equipment allows hour detecting wears and play on the axles.
The latest technologies have been used to create this equipment, allowing a maximum accuracy in finish, achieving a strong machine with excellent appearance and with silent and precise functioning.

Product Ranges :

» DHL CLASSIC →Play Detector Light Vehicles Hydraulic
» DHL TOTAL →Play Detector Light Vehicles Hydraulic
» DLJ5N → Play Detector Pneumatico
» DLJ5 N-4 → Play Detector Pneumatic 4 P
» DHL TOTAL 4 → Play Detector Hydraulic 4 P
» DHU CLASSIC → Play Detector Universal Hydraulic
» DHU TOTAL → Play Detector Universal Hydraulic
» DHU TOTAL 4 → Play Detector Universal Hydraulic
» DHA → Play Detector Agricultural