Cement Testing Equipments – Jitrasindo

NL 3037 X/ Series Three Gang Mould For Prisms

jitrasindo — Mon, 26 Aug 2013 17:21:37 +0000

Used for cast beam mortar specimens.

Technical Spesifications :
* Standard : EN 196/1
* Material : Carbon Steel
* Dimension (mm) : 40.1 (L) x 40 (W) x 160 (H)

* Hardness :

– NL 3037 X / 001 Over 200 HV

– NL 3037 X / 002 Over 500 HV

NL 3036 X / 001 Air Entrainment Meter 1 Litre Capacity

jitrasindo — Mon, 26 Aug 2013 17:19:20 +0000

This product used to determine the air content in cement mortar, cement paste and lime mortar.
Connected to a dial gauge directly the air entrainment in range of 0 – 50%. It is cast aluminium built and the test pot and the upper part air-tight sealed. The product is identical to mod. NL 3034 x / 001 but the process using an electric mini-compressor that give air pressure and keeping it constant during a test.
Standard EN 413/2-DIN 1164

Technical Spesifications :
* Dimension : Ø 200 x 320 mm
* Approx. Weight
– NL 3036 X / 001 : 4 kg
– NL 3036 X / 002 : 6 kg
* Power : 240 V, 50 / 60 Hz, 1 ph

NL 3035 X / 002 Transparence Acrylic Mini Slump

jitrasindo — Mon, 26 Aug 2013 17:17:52 +0000

For the determination of the consistency, the medium and high workability of fresh concrete. Made from transparence acrylic and stainless steel.

Slump Cone :
* Top Diameter: 50 mm
* Base Diameter: 100 mm
* High: 151 mm

Technical Spesifications :
* Approx. Weight : 4.4 kg

Set Consists Of :~
* NL 3035 X / 002 – P 001 Slump Cone ( 1 no )
* NL 3035 X / 002 – P 002 Stainless Steel Tamping Rod ( 1 no )
* NL 3035 X / 002 – P 003 Stainless Steel Base Plate ( 1 no )

Optional Accessories :
* NL 3035 X / 002 – P 001 Carrying Case with Lock
* NL 7055 X / 002 Steel Ruler 300 ml
* NL 7035 SS / 005 Stainless Steel Scoop 115 x 84 x 40 mm

NL 3035 X / 001 Mini Slump Cone Test Apparatus

jitrasindo — Mon, 26 Aug 2013 17:16:24 +0000

For the determination of the consistency, the medium & high workability of fresh concrete. Made from galvanized steel.

Slump Cone :
* Top Diameter: 50 mm
* Base Diameter: 100 mm
* High: 151 mm

Technical Spesifications :
* Approx. Weight : 4.4 kg

Set Consists Of :~
* NL 3035 X / 001 – P 001 Slump Cone ( 1 no )
* NL 3035 X / 003 – P 002 Tamping Rod – Ø 25 mm x 190 mm (L) ( 1 no )
* NL 3035 X / 003 – P 003 Base Plate ( 1 no )

NL 3034 X / 001 Baroid Mud Balance

jitrasindo — Mon, 26 Aug 2013 17:14:54 +0000

It is use to provide a simple method to determine accurately the mud density. This apparatus consists of a base and graduated arm with cup, lid, knife edge, rider, built-in spirit level and counter-weight, carrying case. The constant volume cup is affixed to one end of the graduate arm & the counter-weight on the opposite end.

Technical Spesifications :
* Casing Dimension (mm) : 530 (L) x 140 (W) x 100 (H)
* Approx. Weight : 5 kg

NL 3030 X / 004 Large Capacity Humidity Chamber

jitrasindo — Mon, 26 Aug 2013 17:13:17 +0000

* The Curing Cabinet can carry out standards curing for concrete sample.
* Stainless steel plat from developed countries is used for the internal bladder.
* The spray employs ultrasonic humidification, high power compressor, double layer vacuum glass door and
intellectual instrument with digital display of temperature and humidity.
* Equipped with micro printer which is an idea unit for curing of concrete samples in testing laboratory and quality inspection center.

Technical Spesifications
* Capacity : 360 Litres
* Maximum Temperature : 50°C
* Minimum Temperature : 20°C
* Accuracy of Temperature Control : ± 0.1°C
* Temperature Different : ≤ ± 2°C
* Humidity Control : ³ 95% (adjustable)
* Heating Power : 600 W
* Power of Compressor : 158 W
* Dimension (WxHxD) : 990 x 1470 x 760 mm
* Working Dimension (WxHxD) : 580 x 1130 x 550 mm
* Approx. Weight : 115 kg
* Power : 220 – 240 V, 1 ph, Single Phase

Set Consist Of :~
* NL 3030 X / 003 – P 001 Stainless Steel Shelve ( 7 nos )
* NL 3030 X / 003 – P 002 Stainless Steel Pan ( 1 no )
* NL 3030 X / 003 – P 003 Printer Paper (pack of 3 rolls) ( 1 pk )

NL 3030 X / Series Humidity Chamber Cap. 73 litres

jitrasindo — Mon, 26 Aug 2013 17:10:18 +0000

* Designed to duplicate natural and environmental condition. The Humidity Chamber able to determine the tolerance of a test sample when exposed to various temperature and moisture fluctuations and condition.
* It equipped with a precise syscise system of temperature and humidity control which provide variou necessary environmental simulative condition.
* Micro surface stainless inner, internal chamber with adjustable shelves
* Micro computer temperature and Humidity Controller 30 section process, over temperature, alarm system, large LED screen, series data shows in the same screen and 134A compressor.
* With solid limited temperature, alarm system, over tem will out of the electricity to make sure test safety.
* Double door, easy to open and close, inner door the steel glass door to make sure the sealed well. Outside door with magnetic rubber seal. Easy operation. There has a light in the workroom, easy observe.
* RS485 connect hole.

Technical Spesifications :
* Temp. Range : Humidification: 15 – 50°C, No Humidification: 10 – 50°C 1no.
* Temp. Division : 0.1°C
* Temp. Motion : High Temp.: ±1°C, Low Temp.: ±2°C
* Humidity Variation : 45 – 95% RH
* Humidity Tolerance : ± 5 – 8% RH
* Quantity of Shelve : 3 nos.
* Power : 240 V, 1 ph, 50 / 60 Hz

NL 3030 X / 001
* Capacity : 73 Litres
* Heating Power : 300 W
* Int. Dimension (LxWxH) : 420 x 350 x 500mm
* Ext. Dimensions (LxWxH) : 570 x 560 x 1200mm
* Approx. Weight : 85 kg

NL 3030 X / 002
* Capacity : 150 Litres
* Heating Power : 500 W
* Int. Dimension (LxWxH) : 500 x 400 x 750mm
* Ext. Dimensions (LxWxH) : 640 x 620 x 1270mm
* Approx. Weight : 92 kg

NL 3030 X / 003
* Capacity : 237 Litres
* Heating Power : 800 W
* Int. Dimension (LxWxH) : 500 x 500 x 950mm
* Ext. Dimensions (LxWxH) : 660 x 700 x 1470mm
* Approx. Weight : 115 kg

NL 3029 X / 001 Digital Readout Compression Testing Machine 1000kN

jitrasindo — Mon, 26 Aug 2013 17:08:20 +0000

* The unit comes with digital readout unit for concrete block.
* The 1000 kN Compression Testing Machine for testing strength on cement, lime and mortar.
* The loading rates are manually controlled by electronic variable speed control by servo motor pump unit.
* Load pacer indicators are display in order to guard the fine loading rate to the standard requirement.
* The structure has a four column are prestressed with a special procedure.
* Load capacity and simply locked in position by two bolts.
* The maximum piston stroke up to 50 mm and automatic stop when the piston stroke reaches to the maximum value. Thanks to the automatic limit protection sensor.

Technical Specifications :
* Standard : EN 196-1, EN 12390, ANNEX B, ASTM C109
* Capacity : 1000 x 0.1 kN
* Dimension (mm) : 480 (L) x 600 (W) x 1650 (H)
* Piston Ram Diameter : 155 mm
* Piston Stroke : 50 mm
* Horizontal Clearance : 210 mm
* Vertical Clearance : 320 mm
* Accuracy : ±1.0%
* Approx. Weight : 420 kg
* Power : 240 V, 1 ph, 50 / 60 Hz, 750 W

Unit Consist Of :
* NL 3029 X / 001 – P 001 Upper Spherical Compression Platen ( 1 no )
* NL 3029 X / 001 – P 002 Lower Compression Platen ( 1 no )
* NL 3029 X / 001 – P 003 Distance Piece Ø 158 x 100 mm ( 2 nos )
* NL 3029 X / 001 – P 004 Distance Piece Ø 158 x 50 mm ( 1 no )

Optional Acessories :
* NL 3029 X / 001 – A 001 Set of Upper & Lower Block Compression Platen
* NL 3029 X / 001 – A 002 Lower Compression Platen for 100 mm Cube
* NL 3029 X / 001 – A 003 Hand Operated Hydraulic Pump
* NL 3029 X / 001 – A 004 Printer Paper Roller (pack of 3 rolls)

NL 3027 X / 001 Semi Autoamtic Digital Compression Test Machine (Capacity 500 Kn)

jitrasindo — Mon, 26 Aug 2013 17:06:33 +0000

* Semi Automatic Digital Compression Machine for testing compressive strength on cement, lime and mortar.
* Specimen accordance to standard requirement. Microprocessor technology bring the added advantage of repeatability with comprehensive operational function.
* The load rate is manually control by electric variable speed by servo motor pump unit.
* Load pacer indicator (kN/s) is display in order to guard the fine loading rate to the standard requirement.
* The structure has a single testing bay with two column fitted to the cross-pieces by means of pre-loaded connection.
* House in the testing by is a sophisticated ball seating which settles effortlessly and than self-locks as load increase.
* Compression machine comply with EN 196-1 for testing flexural for mortar prism. Dimension 40 x 40 x 160 mm long.

Technical Specifications :
* Standard : EN 196-1, EN 12390, ANNEX B, ASTM C109
* Capacity : 500 x 0.1 kN
* Dimension (mm) : 600 (L) x 1100 (W) x 1450 (H)
* Division : 0.01 kN
* Accuracy : ±1.0%
* Vertical Clearance : 250 mm
* Horizontal Clearance : 200 mm
* Approx. Weight : 420 kg
* Power : 240 V, 50 / 60 Hz, 1 ph

Unit Consist Of :
* NL 3027 X / 001 – P 001 Upper Spirical Compression Plate ( 1 no )
* NL 3027 X / 001 – P 002 Lower Compression Platen ( 1 no )
* NL 3027 X / 001 – P 003 Distance Riser Ø 100 x 70 mm ( 1 no )

NL 3026 Cast Iron Thee Gang Moulds

jitrasindo — Mon, 26 Aug 2013 17:04:47 +0000

Cast iron or hardened steel three gang mould complete with surface grinding and base plate.

Technical Specifications
* Standard : ASTM C109, AASHTO T106

NL 3026 C / 001
* Material : Cast Iron
* Dimension (mm) : 50 (L) x 50 (W) x 50 (H)
* Approx. Weight : 7.6 kg

NL 3026 C / 004
* Material : Cast Iron
* Dimension (mm) : 50 (L) x 50 (W) x 50 (H)
* Approx. Weight : 3.2 kg

NL 3026 C / 005
* Material : Cast Iron
* Dimension (mm) : 70.7 (L) x 70.7 (W) x 70.7 (H)
* Approx. Weight : ; Approx. Weight : 6 kg

NL 3026 M / 002
* Material : Mild Steel
* Dimension (mm) : 50 (L) x 50 (W) x 50 (H)
* Approx. Weight : 4 kg

NL 3026 M / 004
* Material : Mild Steel
* Dimension (mm) : 75 (L) x 75 (W) x 75 (H)
* Approx. Weight : 6.7 kg

NL 3026 M / 006
* Material : Mild Steel
* Dimension (mm) : 70.7 (L) x 70.7 (W) x 70.7 (H)
* Approx. Weight : 6.2 kg

NL 3026 P / 007
* Material : ABS Plastic
* Dimension (mm) : 70.7 (L) x 70.7 (W) x 70.7 (H)
* Approx. Weight : 0.7 kg